REMKO GmbH & Co. KG
Klima- und Wärmetechnik REMKO
D-32791 Lage, Im Seelenkamp 12
D-32777 Lage, Postfach 1827
Phone:+49 (5232) 606-0
Telefax:: +49 (5232) 606-260
eMail: info@remko.de
Website: www.remko.de
For positions A, B and C only one value can be entered at a time.

REMKO - Cooling load calculation

Calculate the appropriate performance for your air conditioner

1. All windows and doors exposed to the sun

Sky Direction Sun Protection Window Surface Area Cooling Load
South; Southeast m2 = W
Southwest; Northwest m2 = W
East m2 = W
Northeast m2 = W
West m2 = W
North m2 = W
Skylight window m2 = W
*Use only the direction of the sky with the highest value Total W

2. All windows and doors not covered by point 1

Window Surface Area Cooling Load
m2 = W
Total W

3. External walls exposed to the sun **

Wall Surface Area Cooling Load
Light construction (e.g. façade panels) m2 = W
Conventional construction (e.g. masonry) m2 = W
**Use the same direction of the sky as in point 1 Total W

4. Exterior and interior walls to non-air-conditioned rooms that have not yet been recorded

Wall Surface Area Cooling Load
m2 = W
Total W

5. Ceiling, roof and floor ***

Room area Cooling Load
Ceiling to non-air-conditioned room m2 = W
Ceiling to attic without insulation m2 = W
Flat roof with 5 cm insulation m2 = W
Flat roof with 15 cm insulation m2 = W
Flat roof without insulation m2 = W
Floor to non-air-conditioned room m2 = W
Skylight window m2 = W
*** Floor to ground or non-air-conditioned basement room is excluded Total W

6. Persons in the room

Number Cooling Load
Pers. = W
Total W

7. Lighting and electrical equipment

Number Cooling Load
Lighting
Fluorescent Lamp  W Items = W
Normalglühlampe  W Items = W
Computer
Personal Computer (PC) with Monitor  W Items = W
Printer in operation  W Items = W
Other electrical equipment
Occasionally in use W W
Permanently in use W W
Total W

8. Long-lasting openings to non-air-conditioned rooms

Surface Area Cooling Load
m2 = W
Total W

9. Outdoor air

Volume flow rate Cooling Load
m3/h = W
Total W
Total cooling capacity Required W

Note

The temperature difference between outside and inside temperature is approx. 6-8 k. The total cooling capacity includes 30% power for dehumidification. The calculation only returns an approximate indication for the required total cooling performance and does not claim to be accurate. The values determined should be checked by a specialist planner. REMKO does not guarantee the accuracy of the values.